Getting started

Step 1. Connect the power cable

1. Remove the battery cover.
2. Insert the power cable into your device.
3. Place the power cable in the cable organizer.
4. Replace the battery cover.
5. Insert the plug into a power outlet.

Step 2. Turn on your device

• Press and hold the power button for four seconds.

Step 3. Connect your device to your network

You can connect your device to either a wireless network or a wired network.

Connect your device to a wireless network

1. From the home screen, tap Main Menu ≡.
2. Tap Settings, and then tap WiFi Config.
3. Tap the name of your wireless network.
4. Type the password for your wireless network.
5. Tap Connect.

Connect your device to a wired network

1. Remove the battery cover.
2. Insert an Ethernet cable into the Ethernet port on the device.
3. Place the Ethernet cable into the cable organizer.
4. Insert the other end of the Ethernet cable into your router or network socket.
5. Replace the battery cover.

Troubleshooting

My device can’t connect to my wireless network

• Make sure that your device is close to your router and try to connect it to your network again.

My device doesn’t turn on

Complete the following steps:

1. Check that you fully inserted the power cord into your device and into the power outlet.
2. Press and hold the power button for four seconds.

Any questions?

Contact our Customer Support team at 888.477.4500 or email cs@payroc.com.